The PoE 8180 SIP Audio Alerter is a wall mount IP speaker for voice paging, emergency alerting and loud ringing applications. The speaker is a fully compliant 3rd party SIP endpoint. As a result, the 8180 IP speaker is compatible with most hosted / cloud and premise-based VoIP telephone systems.
Network: IPv4, IPv6, DHCP, VLAN, MDNS
Link Layer: LLDP, CDP
QoS: DSCP (SIP, RTP, RTCP)
Web Interface: HTTP, HTTPS
Provisioning: TFTP, FTP, HTTP, HTTPS, DHCP Options 66, 150, 160
Reboot via SIP Check-sync
NAT: STUN, TURN, CRLF Keep Alive, SIP Outbound
Address Resolution: DNS, SRV Record
Supervision: SNMP V1.3, RTCP, Algo 8300
Redundancy: Secondary & Tertiary SIP Servers
Extensions: 50 Page & 10 Alerting/Ring extensions with multicast scalability
Transport Protocols: UDP, RTP, TCP
Security: TLS, SRTP, Mutual Authentication
Audio Specifications
Audio Codecs: G.711 A-law, G.711 u-law, G.722, Opus 48 kHz.
Driver: 3.0” (7.7 cm) UV stabilized
Driver Response: 150 – 13,000 Hz (- 10 dB)
Driver Sensitivity: 86 dBA 1m/1W (1 kHz sine wave)
SPL: Peak 106 dBA/1m (120 dBA with optional horn speaker)
Max Audio Power: 8 Watts
Dispersion Angle: 180° (2 kHz -6 dB)
Audio Memory & Format: 1 GByte user space for WAV or MP3 files
Microphone: Omni-directional, talkback and ambient noise monitoring
Audio Controls: Volume, AGC, Latency, LF Cut
Anti-Feedback Delay: Cache to memory and release
Audio Outputs: Speaker Output 8 Ohm 8W when internal speaker disabled
Audio Output nominal 0 dBm into 600 Ohm load
SoundSure™ Range: 30 dB
Ring Tones Included: Bell NA, Bell UK, Buzzer, Chime, Dogs, Gong, Warble1 (low), Warble2 (medium), Warble3 (high), Warble4 (trill)
Connections
RJ45 Network
Speaker Output
Audio Output
Relay Output
Power Device
PoE Powered: 48 V PoE IEEE 802.3af Class 0
Max 12.95 W - Idle nominal 2.5 W
Environmental Parameters
32 to 104 deg F (0 to + 40 degC); 10-95% RH non-condensing. Dry indoor locations only.
1-year warranty from date of purchase, not exceeding 18 months from date of manufacture